![background image](http://html.mh-extra.com/html/kramer/vs-622dt/vs-622dt_user-manual_2001387068.webp)
Kramer Electronics Ltd.
VS-622DT
– Protocol 3000
66
BAUD
Functions
Permission
Transparency
Set:
BAUD
Administrator
Public
Get:
BAUD?
Administrator
Public
Description
Syntax
Set:
Set protocol serial port baud rate
#BAUD
SP
baud_rate
CR
Get:
Get protocol serial port baud rate
(for current baud rate)
#BAUD?
CR
Response
~
nn
@BAUD
SP
baud_rate
CR LF
~
nn
@BAUD
SP
current_baud_rate
CR LF
Parameters
baud_rate
–
9600, 115200, else (new baud rate to set)
current_baud_rate
– 9600, 115200, else (current protocol serial port baud rate)
Notes
The new defined baud rate is stored in the EEPROM and used when powering up
Default baud rate is 115200 (on factory reset).
Only works with devices supporting this command (if ERR 002 is returned, the default baud rate is
used).
K-Config Example
Set the baud rate to 9600:
“#BAUD 9600”,0x0D
DPSW-STATUS
Command Name
Permission
Transparency
Set:
-
-
-
Get:
DPSW-STATUS?
End User
Public
Description
Syntax
Set:
-
-
Get :
Get the DIP-switch state
#DPSW-STATUS?
SP
dp_sw_id
CR
Response
~nn
@DPSW-STATUS?
SP
dp_sw_id, status
CR LF
Parameters
dp_sw_id
–
1
to
8
(num of DIP switches)
status
–
0
(up),
1
(down)
K-Config Example
get the DIP-switch 2 status:
“#DPSW
-
STATUS? 2”,0x0D