Kramer Electronics Ltd.
VS-622DT
– Protocol 3000
69
Switching/Routing Commands
Command
Description
MTX-MODE
Get auto-switch mode
ROUTE
Set/get layer routing
REMOTE-INFO
Get connected Step-in module information
VID
Set/get video switch state
MTX-MODE
Command Name
Permission
Transparency
Set:
-
-
-
Get:
MTX-MODE?
End User
Public
Description
Syntax
Set:
-
-
Get :
Get auto-switch mode
#MTX-MODE?
SP
output_id
CR
Response
~nn@
MTX-MODE
SP
output_id,mode
CR
Parameters
output_id
–
1
(HDBT OUT 1),
2
(HDMI OUT 2)
mode
–
0
(Manual),
1
(Auto priority),
2
(Auto last connected)
Response Triggers
After execution, a response is sent to the comm port from which the Set/Get was received
After execution, a response is sent to all comm ports if MTX-MODE was set by any other external
control device (button press, WEB, device menu and similar)
Notes
Not recommended for new devices
K-Config Example
Get the auto switch mode of HDMI Out:
“#MTX
-MODE? 1
”,0x0D