![background image](http://html.mh-extra.com/html/kramer/vs-622dt/vs-622dt_user-manual_2001387013.webp)
Kramer Electronics Ltd.
VS-622DT
– Connecting VS-622DT
11
Connecting VS-622DT via the Ethernet Port
You can connect to the
VS-622DT
via Ethernet using either of the following methods:
•
Directly to the PC using a crossover cable (see
Connecting the Ethernet Port Directly to a
on page
•
Via a network hub, switch, or router, using a straight-through cable (see
Ethernet Port via a Network Hub or Switch
If you want to connect via a router and your IT system is based on IPv6, speak to your IT
department for specific installation instructions.
Connecting the Ethernet Port Directly to a PC
You can connect the Ethernet port of the
VS-622DT
directly to the Ethernet port on your PC
using a crossover cable with RJ-45 connectors.
This type of connection is recommended for identifying the
VS-622DT
with the factory configured default IP address.
After connecting the
VS-622DT
to the Ethernet port, configure your PC as follows:
1. Click
Start
>
Control Panel
>
Network and Sharing Center
.
2. Click
Change Adapter Settings
.
3. Highlight the network adapter you want to use to connect to the device and click
Change
settings of this connection
.
The Local Area Connection Properties window for the selected network adapter appears
as shown in
Figure 7: Local Area Connection Properties Window