![background image](http://html.mh-extra.com/html/kramer/vs-622dt/vs-622dt_user-manual_2001387021.webp)
Kramer Electronics Ltd.
VS-622DT
– Using the Web Pages
19
Setting Remote Devices
When the HDMI/HDBT output of a step-in device (for example, the
SID-X3N
,
DIP-30
,
DIP-31
For HDMI inputs and
DIP-20
for HDBT inputs) is connected to an input on the
VS-622DT
, you
can program the step-in buttons via automation (see
) so that when a step-in is carried out (either by pressing the step-in button on the device or
by switching to the input on
VS-622DT
that is connected to the step-in device, other actions
are executed (such as lights, screen and so on) via the
VS-622DT
.
When connecting a step-in device (for example, the
DIP-20
) to an HDBT input on the
VS-622DT
, generally you need to set Data switching to
Direct Control
Some step-in devices can function even if Data Switching is set to
Follow Video
.
Setting data switching to Direct Control disables RS-232 data routing via the HDBT ports.
To configure remote device buttons:
1. In the Navigation pane, click
. The Routing page appears.
2. Click
on an input button.
If a Step-in device is not connected to
that input, you can configure the remote
button features for when that input is
connected in the future.
If an Step-in device is connected (for
example, the
DIP-30
), The Step-in
buttons appear and you can configure
the button(s).
3. You can do the following:
▪
Select one of the inputs on the step-in device (visible only when a device is
connected) to be switched to the output of that device and routed to the
VS-622DT
input.
▪
Check
Echo
to send the ~BTN command to all the control ports. This allows a
connected controller to perform a variety of tasks triggered by the user buttons, such
as room control (lights, screen, and so on).