Kramer Electronics Ltd.
VS-622DT
– Using the Web Pages
22
In the
Speakers Output
area, you can:
•
Slide the Speakers Output slider to set the audio level on the speakers (or type the value
below the slider and then click anywhere outside the text box).
•
Click
to mute the speakers output and
to unmute it.
•
Set the output mode to Lo-Z (to connect to stereo Lo-Z speakers) or Hi-Z (to connect to
mono Hi-Z speakers
– and then select 70V or 100V).
•
Click
to take the speaker output audio signal from OUT 1 or OUT 2.
Switching Data
Use the Routing page to set data switching.
To select the HDBT out data source:
1. In the Navigation pane, click
. The Routing page appears.
2. Click
. The Data Switching tab appears:
Figure 18: Routing Page
– Data Switching
You can:
•
Click
Follow Video
for IR and RS-232 to follow the input video routing.
•
Click
Direct Control
to let the
VS-622DT
control the RS-232 data.
When connecting a step-in device (for example, the
DIP-20
) to an HDBT input on the
VS-622DT
), generally you need to set Data
switching to
Direct Control
.
Some step-in devices can function even if Data Switching is set to
Follow Video
.
Setting data switching to
Direct Control
disables RS-232 data routing between the HDBT
inputs and the HDBT output.