Kramer Electronics Ltd.
VS-622DT
– Changing the Device Settings
32
Changing Ethernet Settings when DHCP is On
When DHCP is set to ON, the device IP address is selected automatically by the system.
To set parameters when DHCP is set to ON:
1. In the Navigation pane, click
Device Settings
. The Device Settings page appears.
2. Take note of the Device Name (required for step
).
3. Click the
Communication
).
4. Click
DHCP
ON
. The following message appears:
Figure 30: Network Settings Page
5. Click
Yes
.
6. Type the device name in the address bar of your browser to reload the page.
You can read the new IP address from the Network Settings page.
DHCP is ON.