Kramer VS-622DT, User Manual, Page: 76 / 91

Kramer Electronics Ltd.
VS-622DT
– Protocol 3000
74
MUTE
Command Name Permission Transparency
Set:
MUTE
End User Public
Get:
MUTE?
End User Public
Description Syntax
Set: Set mute ON/OFF for audio output.
#MUTE SP channel,mute_mode CR
Get:
Get mute ON/OFF state for audio
output.
#MUTE? SP channel CRF
Response
Get:
~nn@ MUTE SP channel,mute_mode CR LF
Parameters
channel – 1
(HDBT OUT 1),
2
(HDMI OUT 2)
mute_mode – mute the output: 0
(Off, unmute),
1
(On, mute)
Response Triggers
Response is sent to the com port from which the Set (before execution) / Get command was
received
After execution, response is sent to all com ports if CMD-NAME was set any other external control
device (button press, device menu and similar) or genlock status was changed.
Notes
Mutes the audio output.
K-Config Example
Mute the HDBT OUT 1 audio output:
“#MUTE 1,1”,0x0D
AUD-HI-Z
Functions Permission Transparency
Set:
AUD-HI-Z
End User Public
Get
AUD-HI-Z?
End User Public
Description Syntax
Set: Set High Z state
#AUD-HI-Z
CR Channel SP HiZState,HiZVolt CR
Get: Get High Z status
#AUD-HI-Z?
3
CR
Response
~nn @AUD-HI-Z SP Channel,HiZState,HiZVolt CR LF
Parameters
Channel
–
3
(Power amp)
HiZState
–
1
(Hi-Z state high),
0
(Hi-Z state low)
HiZVolt
– Hi-Z volt level:
0
(70 Volt),
1
(100 Volt),
0xff
(Ignore). Optional, active only in high
state
Notes
Active only when state is high. Ignore everything else.
K-Config Example
Set the line level output to Hi-Z and 70V:
“#AUD -HI- Z 2,1,0”,0x0D