![background image](http://html.mh-extra.com/html/kramer/vs-622dt/vs-622dt_user-manual_2001387009.webp)
Kramer Electronics Ltd.
VS-622DT
– Installing in a Rack
7
Installing in a Rack
This section provides instructions for rack mounting
VS-622DT
. Before installing in a rack,
verify that the environment is within the recommended range:
•
Operation temperature
– 0
to 40
C (32 to 104
F).
•
Storage temperature
– -40
to +70
C (-40 to +158
F).
•
Humidity
– 10% to 90%, RHL non-condensing.
When installing on a 19" rack, avoid hazards by taking care that:
▪
It is located within recommended environmental conditions. Operating ambient
temperature of a closed or multi-unit rack assembly may exceed ambient room
temperature.
▪
Once rack mounted, enough air will still flow around
VS-622DT
.
▪
VS-622DT
is placed upright in the correct horizontal position.
▪
You do not overload the circuit(s). When connecting
VS-622DT
to the supply circuit,
overloading the circuits may have a detrimental effect on overcurrent protection and
supply wiring. Refer to the appropriate nameplate ratings for information. For example,
for fuse replacement, see the value printed on the product label.
▪
VS-622DT
is earthed (grounded) and connected only to an electricity socket with
grounding. Pay particular attention when electricity is supplied indirectly (for example,
when the power cord is not plugged directly into the wall socket but to an extension
cable or power strip). Use only the supplied power cord.
To rack-mount VS-622DT:
1. Attach both rack ears to
VS-622DT
:
Remove the screws from each side of
VS-622DT
(3 on each side), and replace them
through the rack ears.
2. Place the rack ears of
VS-622DT
against the rack
rails and insert the appropriate screws (not
provided) through each of the four holes in the
rack ears.