![background image](http://html1.mh-extra.com/html/i3-international/s244/s244_quick-start-manual_3062790001.webp)
DEFAULT LOGIN INFORMATION
i3’s S244 managed switch delivers 24 (10M/100M/1G) RJ45/PoE/PoE+
ports plus 2 SFP Gigabit ports and offers even better cost performance
and lower total cost of ownership. The 370 Watts of PoE/PoE+ power
budget makes it ideal for 24 IP cameras. The S244 is simple to install
and configure using a web browser.
PACKAGE CONTENTS
In addition to the switch ensure that the following items are included:
i3 INTERNATIONAL INC.
1.866.840.0004
www.i3international.com
1. Install S244 PoE Switch on a dedicated shelf or inside a rack, as required.
Ensure sufficient airflow all around the unit. Avoid locations with high levels of
dust, vibrations, or humidity.
Note:
Mounting hardware is site-specific and must be supplied by the
installer.
2. Plug in the provided power cord into a AC power supply. Then plug the cord
into the power port on the back panel of the switch. The switch will power on
automatically.
Important:
The use of UPS is highly recommended by i3 International. Power
surge damage is not covered by i3 warranty.
3. Using CAT5e (or better) cable connect the Switch to the SRX-Pro (NVR) or
networked PC using one of the 24 PoE ports (preferred) or one of the SFP
ports, using the SFP Copper RJ45 transceiver (not provided).
4. Use CAT5e (or better) cable not exceeding 328 ft (100 meters) to plug in up to
24 IP cameras into the RJ45 switch ports. Consider the total 370 Watt switch
power budget.
INSTALLATION INSTRUCTIONS
i3-TRNG-Switches-
S244
.indd
Log into the switch through a networked PC. Enter the S244 default IP
Address into the web browser.
Default IP Address
- 192.168.0.10
Default Username
- i3admin
Default Password
- i3admin1
LED
LED Status
Description
System
Green, Solid
Switch is powered on
Link/Act/
Speed
Green, Blink
Connection is 1Gbps
Amber, Blink
Connection is 10/100Mbps
PoE
Green, Solid
PoE on
LED INDICATORS
Press the Mode button to switch between “Link/Act/Speed” and “PoE” modes.
Power Cord
Rubber Feet x4
Rackmount Brackets x2
Bracket screws x8
System LED
Mode LEDs Mode/Reset Button
Port Status LEDs
10/100/1000 RJ45 Ports
100/1000 SFP Ports
Port Connections
24x 10/100/1000 RJ45 connector ports
2x SFP Gigabit ports
PoE Function
PoE ports: 24
PoE Budget: 370 Watts
Supports IEEE802.3at (PoE+ 30W)
Supports IEEE802.3af (PoE 15.4W)
Hardware Performance Forwarding Capacity: 38.68Mpps
Switching Capacity: 52Gbps
Mac Table: 8K
Jumbo Frames: 9216 Bytes
Environment
Operating Temperature: 32-122°F (0-50°C)
Storage Temperature: -4-158°F (-20-70°C)
Humidity: 10 to 90% RH (non-condensing)
Mechanism
Dimensions (L x W x H): 17½ x 8
⅜
x 1¾
inches (442 x 211x 44 mm)
Weight: 7.3 lbs (3.3 Kg)
Power Supply
AC input: 100-240 VAC, 50~60Hz
Maximum Power consumption: 437 Watts
(PoE power included).
Certifications
CE, FCC Part 15 Class A, UL
Quick Start Guide
S244. 24-Port PoE+ Switch
PoE
PoE
PoE
PoE
S244
802.3af
802.3af
802.3af
802.3af
NVR
5. The LED indicators will glow to indicate
the switch is powered on and supplying
power to the connected devices.
Rev. 220714
TECHNICAL SPECIFICATIONS