78
For all heating/cooling circuits
1. Extended menu:
.
2. "Heating" or "Heating/cooling".
3. If applicable, use
/
to select the required heating/cooling circuit.
4. "Operating program".
5.
■
"Only DHW" (no central heating/cooling)
or
■
"Standby mode" (frost protection active)
Temporarily adjusting the room temperature
If you wish to adjust the room temperature temporarily, select "Party mode". "Party mode"
is independent of the time program for central heating/central cooling.
■
For central heating, the home is heated to the temperature set for "Party mode".
■
For central cooling, the home is cooled to the temperature set for "Party mode".
■
If your contractor has not made alternative adjustments, DHW is heated to the se
-
lected DHW temperature first, before central heating/central cooling commences.
■
The DHW circulation pump is switched on (if installed)
Setting Party mode for central heating/central cooling
3DUW\PRGH
&KDQJHZLWK
+&
r&
1. Extended menu:
.
2. "Heating" or "Heating/cooling"
3. If applicable, use
/
to select the
required heating/ cooling circuit.
Note
"Party mode" cannot be set for a
separate cooling circuit.
4. "Party mode"
5. Set the required room temperature
for "Party mode".
