71
EN-114B_f.1294
Setting the operating program for central heating/central cooling
In the "Operating program" for central heating you set whether the central heating is
enabled or not. For an overview of the operating programs, see section "Operating
programs information".
For the preferred heating/cooling circuit
1. Standard menu:
/
for the operating program: E.g. "Heating and DHW".
2.
OK
to confirm.
For all heating/cooling circuits
1. Extended menu:
2. "Heating" or "Heating/cooling"
3. If applicable, use
/
to select the required heating/cooling circuit
4. "Operating program"
5. Select the required operating program, e.g. "Heating and DHW"
Setting the operating program for central heating/central cooling
In the time programs for central heating and central cooling you set the time phrases
during which your home is heated or cooled and to what temperature.
To do so, select an operating status for each time phase: See chapter "Operating status
for central heating/central cooling".
Factory setting: one time phase from 00:00 to 24:00 for every day of the week with the
"Standard" operating status.
■
The factory setting is suitable for operation with underfloor heating systems.
■
No time program can be set for a separate cooling circuit.
1. Extended menu:
2. "Heating" or "Heating/cooling".
3. If applicable, use
/
to select the required heating/cooling circuit.
4. "Time program heating" or "Time proghtg/cooling".
5. Set the required time phases and operating status.
■
Between the time phases, rooms are neither heated nor cooled. Only the heat pump
frost protection is active ("Stand-by" operating status).
■
When making settings, please bear in mind that your heating system requires some
time to heat or cool the rooms to the required temperature.
