51
EN-114B_f.1294
Start-up without commissioning assistant
Start-up service menu
The service menu can be accessed from any menu level.
Press
OK
+
simultaneously and keep it pressed for approx. 4 s
.
The service menu is active until the message "Finish service?" or when no service has
been performed for 30 minutes.
Setting parameters, using the example of "installation scheme 7000"
To set a parameter, first select the parameter group and then given parameter.
Service menu:
1. Press
OK
+
simultaneously and keep it pressed for approx. 4 s.
2. Select "Coding level 1".
3. Select the parameter group: "installation definition".
4. Select the parameter: "installation scheme 7000."
5. Set the installation diagram: Eg. "6".
Alternatively, if the service menu is already active:
Advanced menu:
1.
2. service
3. select "coding level 1"
4. select the parameter group" "installation definition"
5. select the parameter "installation scheme 7000"
6. set the installation diagram: Eg. 6
Required heat pump parameters
"Compressor stage 5030" The heat output of the heat pump depends on the type set
at first start-up.
Types
HPSO-12/400
+HPSI-09
HPSO-16/400
+HPSI-09
HPSO-6/230
+HPSI-06
HPSO-8/230
+HPSI-06
Compressor stage 5030
12 kW
16 kW
6 kW
8 kW
