76
Setting the heating curve/cooling curve
So that your rooms are heated or cooled optimally at all outside temperatures, you can
adjust the "Level" and "Slope" of the "Heating curve" or the "Cooling curve". In this way
you influence the flow temperature of the heat pump.
Setting curves for central heating/central cooling
Factory setting
„Slope”
„Level”
Heating curve
0,6
0
Cooling curve
1,2
0
1. Extended menu:
.
2. "Heating" or "Heating/cooling".
3. If applicable, use
/
to select the required heating/ cooling circuit.
4. "Heating curve" or "Cooling curve".
5. "Slope" or "Level".
6. Set the required value.
You will be provided with tips on when and how tSKKange the heating curve slope and
level. Press .
Example: changing the heating curve slope to 1.1
A graph clearly shows the change in the heating curve as soon as you alter the value
for the slope or level.
+HDWLQJFXUYH
&KDQJHZLWK
+&
6ORSH
r&
r&
r&
r&
r&
Set flow temperatures are assigned to
the different outside temperatures.
Outside temperatures are shown on
the horizontal axis. Set flow tem
-
peratures for the heating circuit are
highlighted.
