86
1. Extended menu:
.
2. "DHW".
3. "1x DHW heating".
Note
This function terminates automatically as soon as "Set DHW temperature 2" has been
reached.
Stopping DHW heating
You do not want to heat DHW, nor heat or cool the rooms:
For this purpose, switch on "Stand-by mode".
For the preferred heating/cooling circuit
1. Standard menu:
/
for the "Stand-by mode" operating program (frost protection).
2.
OK
to confirm.
For all heating/cooling circuits
1. Extended menu:
.
2. "Heating" or "Heating/cooling".
3. If applicable, use
/
to select the required heating/cooling circuit.
4. "Operating program".
5. "Stand-by mode" (frost protection).
You do not want to heat DHW, but do want to provide central heating:
For this purpose, set the standard DHW temperature to its lowest value.
1. Extended menu:
.
2. "Heating" or "Heating/cooling".
3. If applicable, use
/
o select the required heating/ cooling circuit.
4. "Operating program".
5. Depending on the selected heating/cooling circuit: e.g. "Heating and DHW".
6.
until the menu appears.
7. "DHW".
8. "Set DHW temperature".
9. Set 10 °C.
