Korg PA80, User Manual

Page: 251 / 308

20-33 Effects
ER/Delay
049: LCR BPM Dly
The L/C/R delay enables you to match the delay time with the
song tempo. You can also synchronize the delay time with the
arpeggiator or sequencer. If you program the tempo before
performance, you can achieve a delay effect that synchronizes
with the song in real-time. Delay time is set by notes.
Note: With extreme values, the sync may be lost.
a: BPM, b: L Delay Base Note, b: Times, c: C Delay Base
Note,
c: Times, d: R Delay Base Note, d: Times
The delay time is the length of the note obtained by mul-
tiplying the “Base Note” parameter by the Times value, in
relation to the tempo specified by the “BPM” parameter
(or the MIDI Clock tempo if “BPM” is set to
MIDI ).
050: BPM Delay
(Stereo BPM Delay)
This stereo delay enables you to set the delay time to match
the song tempo.
Note: With extreme values, the sync may be lost.
a
BPM
Selects MIDI Clock and assigns tempo MIDI, 40...240
☞
,
b
L Delay Base Note
Selects the type of notes to specify the delay time for TapL
☞
,
Times x1...x16
Sets the number of notes to specify the delay time for TapL
☞
Level
Sets the output level of TapL 0...50
c
C Delay Base Note
Selects the type of notes to specify the delay time for TapC
☞
,
Times x1...x16
Sets the number of notes to specify the delay time for TapC
☞
Level
Sets the output level of TapC 0...50
d
R Delay Base Note
Selects the type of notes to specify the delay time for TapR
☞
,
Times x1...x16
Sets the number of notes to specify the delay time for TapR
☞
Level
Sets the output level of TapR 0...50
e
Feedback (C Delay)
Sets the feedback amount of TapC –100...+100
Src Off...Tempo
Selects the modulation source for the TapC feedback
Amt –100...+100
Sets the modulation amount of the TapC feedback
f
High Damp [%]
Sets the damping amount in the high range 0...100%
☞
Fx:043
Low Damp [%]
Sets the damping amount in the low range 0...100%
☞
Fx:043
g
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level
☞
Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞
Fx:037
h
Spread 0...50
Sets the width of the stereo image of the effect sound
☞
Fx:043
i
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 1
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 1
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 1 –100...+100
C Delay
R Delay
Left
Right
Feedback
Spread
Wet / Dry
Wet / Dry
Wet: Mono In - Stereo Out / Dry: Stereo In -Stereo Out
Input Level D-mod
High Damp Low Damp
L Delay
Input Level D-mod
+
Level
Level
Level
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Base Note x Times
a
BPM MIDI, 40...240
Selects MIDI Clock and assigns tempo
☞
Fx:049,
R > ----, OVER!!
Display the error message if the right channel delay time exceeds the upper
limit
☞
b
L Delay Base Note
Selects the type of notes to specify the left channel delay time
☞
Fx:049,
Times x1...x16
Sets the number of notes to specify the left channel delay time
☞
Fx:049
Adjust [%]
Fine-adjust the left channel delay time –2.50...+2.50%
c
R Delay Base Note
Selects the type of notes to specify the right channel delay time
☞
Fx:049,
Times x1...x16
Sets the number of notes to specify the right channel delay time
☞
Fx:049
Adjust [%]
Fine-adjust the right channel delay time –2.50...+2.50%
d
L Feedback
Sets the feedback amount for the left channel –100...+100
Src Off...Tempo
Selects the modulation source of feedback amount
Amt L –100...+100
Sets the modulation amount of the left channel feedback
e
R Feedback
Sets the feedback amount for the right channel –100...+100
Amt R –100...+100
Sets the modulation amount of the right channel feedback
f
High Damp [%]
Sets the damping amount in the high range 0...100%
☞
Fx:043
g
Low Damp [%]
Sets the damping amount in the low range 0...100%
☞
Fx:043
h
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level
☞
Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞
Fx:037
i
Wet/Dry Dry, 1:99...99:1, Wet
Table , “Sets the balance between the effect and dry sounds,” on page 1
Src Off...Tempo
Table , “Selects the modulation source of the effect balance,” on page 1
Amt
Table , “Sets the modulation amount of the effect bal-
ance,” on page 1 –100...+100
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp
Tempo
BPM
BPM
Base Note x Times
Base Note x Times
Adjust [%]
Adjust [%]
Delay
Delay