Konica Minolta bizhub Press 1250P, User Manual

Page: 97 / 202

4-60 Saddle Stitcher SD-513
Forming Spine Corners on Fold & Stapled Sets 4 4.11
4.11 Forming Spine Corners on Fold & Stapled Sets
4.11.1 Functional Overview
Spine corner forming can be performed in combination with fold & staple when Folding Unit FD-504 is
mounted on Saddle Stitcher SD-513 .
NOTICE
When Spine Corner Forming is specified, Crease is not available.
d
Reference
The number of sheets processed for spine corner forming equals the number of sheets processed for fold &
staple. Please check paper information before use. See "Paper Information" (page 2-12) for details.
NOTICE
The multi half-folded and stapled sets will be delivered onto the bundle exit tray . Set up the bundle exit tray
extension , and follow the preparation process before opening the stopper . Failing to carry out the prepara-
tion may lead to output sheets falling off the bundle exit tray . It could also cause the sensor to fail to detect
the output full condition.
NOTICE
When increasing or further lowering the spine corner forming strength, you can adjust it to the appropriate
setting. See page 5-48 for details.
Setting item Details Illustration
[Fold&Staple]
(+ [Fore-edge Trim-
ming])
Fold & Staple Set-
ting [Spine Corner
Forming] to be set
to [ON] For "Spine Corner Form-
ing Strength", select
[], [Strong], [Nor-
mal], [Weak], or [Weak+].