Konica Minolta bizhub Press 1250P, User Manual

Page: 157 / 202

5-28 Saddle Stitcher SD-513
[Saddle Stitcher Adjustment] - [Tri-Fold Position Adj.] 5 5.5
5.5 [Saddle Stitcher Adjustment] - [Tri-Fold Position Adj.]
Adjust the tri-fold positions determined by Saddle Stitcher SD-513 .
Objects of adjustment: Full Area (Offset for All Size), A4 w , 8.5 e 11 w
NOTICE
When adjusting both 1st Fold and 2nd Fold, be sure to start with the 1st Fold adjustment. The positions of
both 1st Fold and 2nd Fold are calculated from the edge of the sheet. Consequently, the measurement (b) in
step 7 is subject to the change in either position of the fold.
NOTICE
With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific pa-
per size selected, set value will be the sum of the entered value and the value previously specified for [Full
Area] ([Offset for All Size]).
Maximum adjustment value for A4 w in 1st Fold is +90.
Maximum adjustment value for 8.5 e 11 w in 1st Fold is +30.
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Display the Tri-Fold Position Adjustment Screen.
%
In bizhub PRESS 1250/1250P/1052 , press [02 Finisher Adjustment], [08 Saddle Stitcher Adjust-
ment], and [04 Tri-Fold Position Adj.] in sequence.
% In bizhub PRESS C1070/C1070P/C1060/C71hc , press [04 Finisher Adjustment], [04 Saddle
Stitcher Adjustment], and [04 Tri-Fold Position Adj.] in sequence.
% In bizhub PRESS C1100/C1085 , press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment],
and [04 Tri-Fold Position Adj.] in sequence.
3
Select the size to be adjusted.
4
Press [Print Mode].
5
Load the paper size selected in step 3 into the tray, then select that tray key.
6
Press Start on the control panel . A sample pattern will be output.