Konica Minolta bizhub Press 1250P, User Manual

Page: 166 / 202

Saddle Stitcher SD-513 5-37
5.9 [Saddle Stitcher Adjustment] - [Fore-edge Trimming Adjustment] 5
9
If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data.
%
Adjustable range: -400 (small) to 400 (large) (1 step = 0.1 mm)
% Use [+<->-] to specify the value to be positive or negative.
%
Enter the value so that the cover should be cut by 5.0 mm or more. If the trimming width is less than
5.0 mm, the trimming operation may not performed properly. Therefore, even if the trimming width
is specified as 5.0 mm or less, actual trimming width is automatically adjusted so that it does not
fall below 5.0 mm.
10
Press [Set] to change the current data.
11
Repeat the steps from 4 to 10 until the desired result is obtained.
12
Press [Return] to restore the Saddle Stitcher Adjustment Menu Screen.