Konica Minolta bizhub Press 1250P, User Manual

Page: 171 / 202

5-42 Saddle Stitcher SD-513
[Saddle Stitcher Adjustment] - [Crease Position Adjustment] 5 5.12
5.12 [Saddle Stitcher Adjustment] - [Crease Position Adjustment]
5.12.1 Half-Fold Crease Position
The half-fold crease position determined by Creaser Unit CR-101 mounted on Saddle Stitcher SD-513 can
be moved. Adjust the distance between the cover edge of the output top face and the crease.
Objects of adjustment: Full Area (Offset for All Size), 11
e
17
w
, A3
w
, B4
w
, 8.5
e
14
w
, A4
w
, 8.5
e
11
w
,
B5 w , 8 e 13 w , 8.125 e 13.25 w , 8.5 e 13 w , 8.25 e 13 w , 8K w , 16K w , 12 e 18 w , A3W w , B4W w ,
A4W
w
, B5W
w
, 12
e
18W
w
, 11
e
17W
w
, 8.5
e
11W
w
, Custom, SRA3
w
, SRA4
w
NOTICE
With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific pa-
per size selected, set value will be the sum of the entered value and the value previously specified for [Full
Area] ([Offset for All Size]).
NOTICE
Make this adjustment after [Half-Fold Position Adjustment] (page 5-32) has been completed.
NOTICE
Depending on the paper weight, when the crease position is adjusted, it may no longer align with the fold po-
sition. In such a case, make this adjustment again so that the crease position aligns with the fold position.
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
2
Display the Half-Fold Crease Position Adjustment Screen.
% In bizhub PRESS 1250/1250P/1052 , press [02 Finisher Adjustment], [08 Saddle Stitcher Adjust-
ment], [11 Crease Position Adjustment], and [01 Half-Fold Crease Position] in sequence.
% In bizhub PRESS C1070/C1070P/C1060/C71hc , press [04 Finisher Adjustment], [04 Saddle
Stitcher Adjustment], [11 Crease Position Adjustment], and [01 Half-Fold Crease Position] in se-
quence.
%
In bizhub PRESS C1100/C1085 , press [03 Finisher Adjustment], [04 Saddle Stitcher Adjustment],
[11 Crease Position Adjustment], and [01 Half-Fold Crease Position] in sequence.