Konica Minolta bizhub Press 1250P, User Manual

Page: 7 / 202

1-2 Saddle Stitcher SD-513
Intended Use of this Machine 1 1.1
1 Introduction
1.1 Intended Use of this Machine
Intended Use
Saddle Stitcher SD-513 (this machine) is an optional saddle stitcher for the digital printing system. With this
machine installed, you can use the half-fold and fold & staple functions and combine the half-fold/fold & sta-
ple function and the fore-edge trimming function.
Also, if this machine is equipped with optional devices, you can add fold lines (creases) and perform 2-side
slitting or spine corner forming for cover paper.
This machine supports the following digital printing systems.
-
bizhub PRESS 1250/1052
- bizhub PRESS 1250P
-
bizhub PRESS C1070/C1060
- bizhub PRESS C1070P/C71hc
- bizhub PRESS C1100/C1085
To use this machine, comply with the following items.
- Use this machine in the range of the specifications for the main body and optional devices.
- Comply with all the precautions for safety information described in the user's guide.
- Comply with the prohibited items for copying or printing. (For details, refer to "Safety Information" in
the booklet manual supplied with the digital printing system.)
-
Faithfully observe inspection and maintenance instructions.
- Strictly observe the national and corporate safety regulations and general safety standards.
Unacceptable operation conditions
This machine may not run when:
- an error or damage has been detected;
-
the maintenance interval has expired; and
- mechanical functions or electrical functions do not run normally.
Disclaimers
We assume no responsibility for damages that is caused when this machine is operated under unacceptable
conditions.