![Konica Minolta bizhub Press 1250P User Manual Download Page 173](http://html1.mh-extra.com/html/konica-minolta/bizhub-press-1250p/bizhub-press-1250p_user-manual_1993630173.webp)
5-44
Saddle Stitcher SD-513
[Saddle Stitcher Adjustment] - [Crease Position Adjustment]
5
5.12
5.12.2
Tri-Fold Crease Position
The tri-fold crease position determined by
Creaser Unit CR-101
mounted on
Saddle Stitcher SD-513
can
be moved. The position of 1st Fold Crease is calculated from the edge of the sheet, while that of 2nd Fold
Crease is calculated from the position of 1st Fold Crease. Adjust the distance between each reference posi-
tion and the crease position.
Objects of adjustment: Full Area (Offset for All Size), A4
w
, 8.5
e
11
w
NOTICE
With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific pa-
per size selected, set value will be the sum of the entered value and the value previously specified for [Full
Area] ([Offset for All Size]).
NOTICE
Make this adjustment after [Tri-Fold Position Adj.] (page 5-28) has been completed.
NOTICE
Depending on the paper weight, when the crease position is adjusted, it may no longer align with the fold po-
sition. In such a case, make this adjustment again so that the crease position aligns with the fold position.
NOTICE
Depending on the crease position, the tri-fold position is drawn to the crease position, and the fold position
may be changed.
In this case, carry out [Tri-Fold Position Adj.] (page 5-28) to determine the tri-fold position, then follow the
steps below to adjust the crease position.
1. Move the crease position away from the tri-fold position. Move the crease position in the minus (-) or plus
(+) direction so that each current position is displaced at a maximum before outputting sheets.
2. Check the output sheets, then measure the distance between the output crease position and the desired
crease position.
3. Enter the distance measured above into the Setting Data field of Crease Position Adjustment.
See the steps below for details on the setting procedure.
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.
Summary of Contents for bizhub Press 1250P
