Konica Minolta bizhub Press 1250P, User Manual

Page: 109 / 202

4-72 Saddle Stitcher SD-513
Combining Perfect Binder PB-503 4 4.13
10
Specify crease for cover.
For "Crease", select [(3)Spine], [(4)Gutter], [(3) Spine + (4) Gutter], or [OFF].
% This setting is not available when [PB Tray] is selected for "Cover Tray". Select a tray other than [PB
Tray].
% Selecting [(3)Spine] will add 2 creases on the fold part of the spine.
%
Selecting [(4)Gutter] will add 2 creases on the gutter of the front cover and the back cover, making
bound pages easier to flip.
%
Selecting [(3) Spine + (4) Gutter] will add 2 creases each on the back cover and the gutter.
% Selecting [OFF] will result in no crease to be added.
11
Press [Previous].
The Perfect Bind Screen will be restored.
The screen shows the details of perfect binding settings currently made. Check the settings.
12
Press [OK] to confirm the settings.
% To restore the previous setting, press [Cancel].
%
To disable the function while keeping the current setting, press [Function OFF].
The Output Setting Screen will be restored.
13
Press [OK] on the Output Setting Screen to return to the Copy Screen.
The Perfect Bind icon will be displayed under [Output Setting] on the Copy Screen.
14
Select additional copy conditions, as desired.
%
When making double-sided copies, select [1->2] or [2->2].
% If the original count exceeds 100, use Separate Scan mode.
15
Enter the desired print quantity from the control panel keypad.
% It is recommended to proof copy before making multiple sets.
%
After proof copying, the actual thickness of body set will be displayed on the Perfect Bind Screen.
Use this information to adjust the spine width if it differs from the value specified before.
16
Press Start on the control panel .
Perfect Binder PB-503 does not operate while the heater of perfect binder is warming up. When war-
mup is completed, the machine operation starts automatically.
NOTICE
Never open the front door of the Perfect Binder PB-503 while the machine operation is in process. Oth-
erwise the machine immediately stops the operation and paper jam may be caused.