Konica Minolta bizhub Press 1250P, User Manual

Page: 146 / 202

Saddle Stitcher SD-513 5-17
5.2 [Saddle Stitcher Adjustment] - [Staple Center Adjustment] 5
7
Exit the print mode to return to the Staple Center Position Adjustment Screen.
%
In bizhub PRESS 1250/1250P/1052 , press [Close].
% In bizhub PRESS C1070/C1070P/C1060/C71hc or bizhub PRESS C1100/C1085 , press [Exit
PrintMode].
8
If adjustment is required, use the touch panel keypad or control panel keypad to enter the setting data.
% Adjustable range: -20 (To move rearward) to +20 (To move frontward) (1 step = 0.1 mm)
% Use [+<->-] to specify the value to be positive or negative.
9
Press [Set] to change the current data.
10
Repeat the steps from 3 to 9 until the desired result is obtained.
11
Press [Return] to restore the Staple Center Position Adjustment Menu Screen.
5.2.2 Center Position of Front 2 Positions of 4 Position Staple
Adjust the center position of the front 2 positions of 4 position staples determined by Saddle Stitcher
SD-513 .
Objects of adjustment: Full Area (Offset for All Size), B4
w
, 8K
w
, 11
e
17
w
, A3
w
, A3W
w
, B4W
w
,
11 e 17W w , Custom
NOTICE
With [Full Area] ([Offset for All Size]) selected, the entered value will be applied to all sizes. With a specific pa-
per size selected, set value will be the sum of the entered value and the value previously specified for [Full
Area] ([Offset for All Size]).
NOTICE
Make this adjustment after [Half-Fold Position Adjustment] (page 5-32) has been completed.
1
Press [Adjustment] on the Machine Screen to display the Adjustment Menu Screen.