manualshive.com logo in svg

Konica Minolta 7255, Instruction Manual

Share
Download
Konica Minolta 7255 Instruction Manual Download Page 61

Loading Paper (continued)

2-25

3.

Place paper on the tray with the curl side turning up.

Load paper aligning it to the right side of the tray.

 Please Be Reminded!

• Do not load above the limit indicated on the side guide plate.
• Be sure that the rear guide plate is correctly positioned according to

the paper size to be loaded; otherwise machine trouble may occur.

4.

Push in the tray until it locks into place.

The indicator 

“

”

 on the tray key will change to 

“

”

.

 Please Be Reminded!

Do not bump the tray into the main body; otherwise machine trouble
may be caused.

Machine 

Information

Machine 

Configuration

Turn On/Off 

the Power

Loading 

Paper

Changing 

Paper Size

Summary of Contents for 7255





















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands