Konica Minolta 7255, Instruction Manual

Page: 178 / 436

7-12
Punching File Holes in Copies (Punch)
The Punch mode is available only when the PK-110/120/120 Type-A Punch-
ing kit or PZ-108/109 Punching / Z-Folding unit option is installed in the FS-
110/FS-210 Finisher, or PZ-108/109 Punching / Z-Folding unit option is
installed in the FS-111 Finisher.
If both PK-110/120/120 Type-A Punching kit and PZ-108/109 Punching / Z-
Folding unit are installed in the FS-110/FS-210 Finisher, the PZ-108/109
Punching / Z-Folding unit is used.
When the Punch mode is selected in combination with any of the Primary
(Main) tray output modes, each copied sheet is punched and output to the
Primary tray according to the selected output mode.
FOR DETAILS
• Some staple positions previously selected may conflict with this
function.
• Special size paper (STD size (special), Non STD size, Wide size)
cannot be punched.
• If the ATS (Automatic Tray Switching) functions while the machine
uses the PK-110 Punching kit in Punch mode, the punch holes may
be slightly off the appropriate positions.
Please Be Reminded!
• Do not punch special paper type such as transparent films, labels,
tabbed sheets, etc. Otherwise, machine trouble may occur in Punch-
ing kit.
• Be sure that the side guide plates of the paper tray are securely
aligned to the paper; otherwise the copies may not be punched in
position.
>>>Specifications for Punch Mode<<<
❒
Number of holes:
PK-110/120 Punching kit; 4 holes
PK-120 Type-A Punching kit; 4 holes (Swedish type)
PZ-108 Punching / Z-Folding unit; 4 holes
PZ-109 Punching / Z-Folding unit; 2 or 4 holes (user-selective)
❒
Hole diameter: 6.5 mm ± 0.5 mm
❒
Hole pitch:
80 mm ± 0.5 mm
21 mm ± 0.5 mm / 70 mm ± 0.5 mm / 21 mm ± 0.5 mm (PK-120 Type-A)
❒
Copy paper size:
4 holes; A3, B4, F4, A4, B5, 8.5”x11”
2 holes; A3, B4, F4, A4, A4R, B5, B5R, A5, A5R, 8.5”x11”, 8.5”x11”R,
5.5”x8.5”, 5.5”x8.5”R
❒
Paper weight: 60 ~ 90 g/m
2
(80 g/m
2
paper recommended)
Thin paper: 50 ~ 59 g/m
2
Thick paper: 91 ~ 170* g/m
2
*Some 170 g/m
2
paper types may not be punched easily.
❒
Incompatible Conditions: Using platen glass (available when using Platen
store mode), Fold, Stitch & Fold, Three-Fold, Output to Secondary (sub)
tray, Non STD Size, OHP Interleave