Konica Minolta 7255, Instruction Manual

Page: 242 / 436

Erasing Outside of the Original (Non-Image Area Erase) (continued)
9-30
3.
Touch OK on the Application Selection Screen.
The Basic Screen will be restored.
4.
Select magnification and paper size, as desired.
FOR DETAILS
• APS and AMS are automatically released.
• Copy mode is automatically set to 1-1. When selecting 1-2 mode,
Platen store mode will function automatically.
5.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-6 for details on setting print quantity.
6.
Position original FACE DOWN on the platen glass.
Please Be Reminded!
DO NOT CLOSE THE DOCUMENT FEEDER.
Original size should be larger than 10 mm x 10 mm.
7.
Press [ START ].
FOR DETAILS: Oblique Erase and Rectangle Erase Modes
The Non-image area erase has two modes; Rectangle erase mode and
Oblique erase mode. The copier is initially set to select either mode
appropriate for the original placed on the platen glass (AUTO mode).
Key Operator can specify either mode and the original density level
manually so that the Non-Image Area Erase functions without fail.
See p. 13-56.
Having Any Problem?
This function may perform incorrectly if the lighting in the work place is
directly over the platen glass. In this case, consult your service repre-
sentative about an appropriate place for installation.
Rectangle erase mode Oblique erase mode