Konica Minolta 7255, Instruction Manual

Page: 169 / 436

Programmed Shut-Off (Weekly Timer) (continued)
7-3
The Timer Interrupt password is not factory set and must be entered by the
Key Operator.
In the event the Timer Interrupt password has not been entered by the Key
Operator, the following message will display instead.
Input copy time
0 hour(s) 05 minute(s)
When the above message displays, proceed to step
4
.
2.
Enter the password.
Enter a 4-digit number Timer Interrupt password using the keypad on the
control panel.
HINT
For setting the Timer Interrupt password, see p. 13-35.
FOR DETAILS
If an invalid password is entered, continue by entering the valid 4-digit
password.
3.
Press [ START ].
The following message will be displayed on the Basic Screen.
Input copy time
0 hour(s) 05 minute(s)
4.
Set the hour for the interrupt use.
Enter a 1-digit hour (ex. 3 hours is 3) using the keypad on the control panel.
(0 ~ 9)
5.
Press [ START ].
6.
Set the minute for the interrupt use.
Enter a 2-digit minute (ex. 7 minutes is 07) using the keypad on the control
panel. (00 ~ 59)
FOR DETAILS
Entering a number smaller than 5 will set the minute at 5.
7.
Press [ START ].
Copying is available until the set time is up.
Advanced
Information
Using Finisher
Manually
Cover Sheet
Feeding
Three-Fold
Z-Fold
Tandem Mode
Punch
Fold /
Stitch&Fold
Vertical/Hori-
zontal Zoom
Rotation
Weekly
Timer