Konica Minolta 7255, Instruction Manual

Page: 116 / 436

Output Mode for Machine with Finisher (continued)
3-46
❒
Incompatible with Group mode: 1-2 or 2-2 mode using platen glass (unless
Platen store mode is used), Proof Copy, Fold, Stitch & Fold, Three-Fold,
Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP Interleave,
Image Insert, Repeat
❒
Incompatible with Group using Secondary (sub) tray: 1-2 or 2-2 mode using
platen glass (unless Platen store mode is used), Proof Copy, Fold, Stitch &
Fold, Three-Fold, Punch, Cover sheet feeding, Sheet/Cover Insertion,
Chapter, Combination, Booklet, OHP Interleave, Image Insert, Repeat
❒
Incompatible with Face Up exit: 1-2 or 2-2 mode using platen glass, Fold,
Stitch & Fold, Three-Fold, Punch, Cover sheet feeding
1.
Close the RADF securely, then press [ AUTO RESET ].
HINT
The Sort mode using Primay (main) tray is initially selected.
Key Operator can change the initial output mode. See p. 13-10.
2.
Select the desired output mode.
To set Non-sort or Sort mode using Primary (main) tray: proceed to the next
step.
To set Staple-sort mode using Primary (main) tray: proceed to step
4
.
To set Group mode using Primary (main) tray or output to Secondary (sub)
tray: proceed to step
5
.
3.
To set Non-sort or Sort mode:
Check that
SORT
is already highlighted on the Basic Screen in initial condition.
To select Non-sort mode, touch
SORT
to deselect it.
Proceed to step
6
.