Konica Minolta 7255, Instruction Manual

Page: 380 / 436

13-12
[3] User Setting Mode
Set two userset density levels and three USERSETs of magnification.
[1] User Density Level 1 Setting
Output copying samples from 16 density levels from Lighter to Normal or
Normal to Darker, then select the desired exposure and program it as
USER1.
The programmed copy density can be recalled by selecting USER1 on the
Basic Screen.
User Setting Mode Menu Screen User Density Level 1 Setting Screen
Procedure
1
Touch
[3] User setting mode
on the Key Operator Mode Screen to display the
User Setting Mode Menu Screen.
2
Touch
[1] User density level 1 setting
to display the User Density Level 1
Setting Screen.
3
Place the original on the platen glass or in the RADF.
4 Touch Darker or Lighter to select the density level to be programmed.
5
Touch
No.1 1~4
,
No.2 5~8
,
No.3 9~12
,
No.4 13~16
, or
Set density ##
, then
press [
START
]. The density level sample sheet will be output.
6
Select the desired exposure from the sample sheet(s), then enter the density
level No. by using the touch screen keypad.
7
Touch
OK
to complete the setting and return to the User Setting Mode Menu
Screen.
8
Touch
RETURN
to restore the Key Operator Mode Screen.
9
If no further changes are required, touch
RETURN
to restore the Basic Screen
to perform copying operations.