Konica Minolta 7255, Instruction Manual

Page: 268 / 436

Printing Stamp, Page, Date/Time onto Copies (Stamp) (continued)
9-56
CAUTION
When the finisher / shift tray / paper exit tray capacity is
exceeded due to the print quantity selected, remove the copied
sets as they exit; otherwise, mishandled paper will occur.
FOR DETAILS: Fine Adjustment Setting Screen
When
FINE ADJ. OF POSITION
is touched, the Fine Adjustment Set-
ting Screen will be displayed.
Touch UP SIDE , DOWN SIDE , RIGHT SIDE , or LEFT SIDE to specify
the direction, then use the touch screen keypad or up/down arrow key to
enter the desired amount, from 0 to 50 mm.
Touch
OK to return to the previous screen.
Starting No. Setting Screen: Available from SET NUMBERING or WATER-
MARK NUMBERING
Use the touch screen keypad or up/down arrow key to enter the desired
starting number, then touch
OK
to return to the previous screen.
Starting No. Setting Screen: Available from PAGE NUMBERING
When Chapter is already selected, the chapter starting number can also
be specified on the Starting No. Setting Screen.
Touch
PAGE NUMBER
or
CHAPTER NUMBER
to highlight it, then use
the touch screen keypad or up/down arrow key to enter the desired
starting number for each.