Konica Minolta 7255, Instruction Manual

Page: 119 / 436

Output Mode for Machine with Finisher (continued)
3-49
Touch
OK
to restore the Basic Screen.
OUTPUT MENU
will be highlighted,
and the output icon of the selected output mode will be displayed in the
output icon area.
6.
Select additional copy conditions, as desired.
7.
Enter the desired print quantity from the control panel keypad.
HINT
See p. 11-3 to be sure that the finisher capacity is not exceeded.
8.
Position original(s).
HINT
See p. 3-2 to p. 3-5 for details on positioning originals.
9.
Press [ START ].
Press [
STOP
] to suspend the scanning or printing job.
CAUTION
When the finisher exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Set Job During
Warmup
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-1, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Finisher
Output Mode
Binding
Mode
Shift Tray
Output Mode
Recalling
Previous Job
Check Mode
& Proof Copy
Interrupt
Mode