manualshive.com logo in svg

Komatsu WA480-8, Operation & Maintenance Manual

Share
Download
Komatsu WA480-8 Operation & Maintenance Manual Download Page 38

Caution when traveling in reverse

(Machine with rearview camera)
“09833-C0881”

• When backing up, rear of machine is displayed on monitor.

Before moving, look back and at mirror and monitor to con-
firm that no one is rear of machine.

• Failure to do so can result in serious injury or death.

Caution for handling DEF

“09632-61480”

• DEF Only.

To avoid engine damage or fire, fill with DEF only.

• Never use diesel fuel.

Caution while engine is running

“09667-A0481”

• Sign indicates a hazard of rotating parts, such as belt.
• Turn off before inspection and maintenance.

&

$

SAFETY LABELS

SAFETY

2-12

Summary of Contents for WA480-8

























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands