Komatsu WA480-8 Page 297 Operation & Maintenance Manual Download | Manualshive

Page: 297 / 440

background image

2.

Press (A) or (B) of the temperature control switch to set to
the desired temperature.
The air flow and combination of the vents are automatically
selected according to the set temperature, and the air con-
ditioner is operated automatically to provide the set tem-
perature.

REMARK

• If the air conditioner switch is not turned ON when the

ambient temperature is high, air is not cooled and its
temperature may not decrease to the set temperature.

• After automatic operation, the air flow may be set to

“Lo” for a certain period to prevent cold air from blow-
ing out, depending on the ambient temperature.

• Once the desired temperature is set, do not operate

the temperature control switch unnecessarily. It may
take longer time to reach the set temperature.

• To heat or cool air quickly, set the temperature display

to 18.0 °C (max. cooling) or 32.0 °C (max. heating).

• If any switch is operated during automatic operation,

the function of that switch is applied first, and AUTO
on the air conditioner monitor goes out and the man-
ual operation is selected.

METHOD FOR STOPPING AUTOMATIC OPERATION

Press the air conditioner OFF switch.
The display on the display monitor goes out and the operation
stops.

METHOD FOR MANUAL OPERATION

1.

Press (A) or (B) of the fan switch and adjust the air flow.
If fan switch (A) is pressed while the air conditioner power
supply is OFF, the air conditioner power supply is turned
ON and the air flow is set to “Lo”.

OPERATION

HANDLE AIR CONDITIONER

3-229

«
...
295
296
297
298
299
...
»

Summary of Contents for WA480-8

























































































































































































































































































































































































































































Reviews:

No comments

Related manuals for WA480-8

Brand: Case Pages: 430

Brand: Toro Pages: 32

Brand: OverBilt Pages: 11

Brand: FFC Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands