CUP HOLDER
The cup holder is located on the rear right of the operator's
seat.
ASHTRAY
An ashtray is located on the right side of the operator's seat.
It is magnet type, so you can install it to appropriate place each
time.
Always extinguish your cigarette before putting it in the ashtray,
and be sure to close the lid.
POWER SUPPLY OUTLET
12 V power supply
Capacity of this power supply is 120 W (12 V x 10 A).
Use the power outlet as a power supply for the lighting equip-
ment, etc.
FUSE
NOTICE
When replacing the fuse, make sure to turn the starting switch to OFF position, and set the battery dis-
connect switch to OFF position.
• The fuse holder is provided inside the cover under the op-
erator's seat.
• The fuse protects the electrical component and wiring from
burning out due to abnormal current.
• If the fuse becomes corroded, or white powder can be
seen, or the fuse is loose in the fuse holder, replace the
fuse.
• Replace the fuse with the one of the same capacity.
RKA82650
RKA68080
RKA63980
OPERATION
EXPLANATION OF COMPONENTS
3-81
WENAM00241
Summary of Contents for PC80MR-5E0
