Kodak I5X50 SERIES, Setup Manual

Page: 62 / 100

58 A-61848 / TWAIN October 2016
Data — indicates what must be in the barcode data.
• Contains — select the type of data.
- Any Value : the data can be anything. Use this option to sort by
barcode type — e.g. any Code 3 of 9.
- Number : allows you to compare the barcode data with a number
up to 9 digits long. Any non-digit characters, even a space, will
cause the comparison to fail.
• Comparison : select how to compare: Equal To , Not Equal To ,
Less Than , Greater Than , Less Than or Equal To , and
Greater Than or Equal To .
• Value : enter up to a nine-digit number to compare the barcode
data with.
- Text : allows you to compare the barcode data with a string of
characters. The character value searched for must fall within the
first 4096 characters of the barcode value.
• Comparison : select how to compare: Contains , Equal To , Not
Equal To , Starting With , Not Starting With , Ending With ,
and Not Ending With . The comparison is not case-sensitive,
so “DATA” is equal to “data”.
• Value : enter up to 32 characters to compare the barcode data
with.
• Length — select how much data there must be (i.e. number of digits
and characters), from 1 to 99 .
- Any : any number of characters meets the criterion
- Equal To
- Not Equal To
- Less Than
- Greater Than
- Between
NOTE: The Data options are not available when Barcode is None
Detected .
OK — saves any changes and closes this window.
Cancel — closes this window without saving any changes.
Help : displays help information for this window