Kodak I5X50 SERIES Setup Manual Download Page 90

Page: 90 / 100

A-61848 / TWAIN October 2016

Diagnostics - Logs tab

The Logs tab allows you to view scanner information.

Logs

•

General

: displays the scanner’s version information, serial number,

attached/installed accessories, meters, etc.

•

Operator

: displays the scanner’s log. This log can only be cleared by

Kodak Alaris Technical Support.

Toolbar buttons

Save As

: saves all the logs for viewing by Technical Support. When

selected, a Save As window will be displayed:
•

Description

: enter a brief description of problem/reason for saving

the logs.

•

Folder

: the location to save the logs.

•

Browse

: displays the operating system’s File Open window so you

can find the folder that you want to use.

•

Include debug images

: includes any generated debug images

with the logs. This is turned on by default and should only be
turned off when recommended by Technical Support.

•

Save

: saves the logs into a file with the extension .eklog.

Refresh

: refreshes the currently displayed log.

Summary of Contents for I5X50 SERIES





































































































Search results

Summary of Contents for I5X50 SERIES

Reviews:

Related manuals for I5X50 SERIES

Brands by name

Popular brands

Kodak I5X50 SERIES, Setup Manual

Search results

Summary of Contents for I5X50 SERIES

Reviews:

Related manuals for I5X50 SERIES

Brands by name

Popular brands