48
A-61848 / TWAIN October 2016
Buttons for rules:
Add
— allows you to create a new rule. The Size window will
be displayed.
NOTE:This option will not be available if you have created
the maximum number of allowed rules.
Change
— allows you to change the currently selected rule.
The Size window will be displayed, with the current options
for this rule selected.
Delete
— allows you to remove the currently selected rule.
NOTE: Refer to “The Device Settings window” on page 39 for
information about common buttons and options.
Sorting - Size Window
From this window you can select the options for one size rule.
Length
— allows you to select the length the sheet of paper must be for
this rule to be applied.
•
(none
)
•
Less Than
: sheets shorter than this length will be sent to the defined
destination.
•
Greater Than
: sheets longer than this length will be sent to the
defined destination.
•
Between
: sheets whose length falls within the selected range will be
sent to the defined destination.
NOTES:
• A length option can be used only once. If the option has been
used in another rule, it will not be available.
• The available length values may change based on the selection
for
Destination
.
• When a
Less Than
or
Between
length is specified with a front
tray destination (lower tray or upper tray), the physical page must
be shorter than 15 inches/38cm.
• When a
Less Than
or
Between
length is specified for the rear
exit, the physical page must be shorter than 6 inches/15cm.
• When entering a length, consider including an extra 1/2 inch/15
mm to account for possible document skew during scanning.
Summary of Contents for I5X50 SERIES
