manualshive.com logo in svg

Knick Stratos Pro A201 PH, User Manual

Share
Download
Knick Stratos Pro A201 PH User Manual Download Page 164

164

Glossary

Slope

Is indicated in % of the theoretical slope  

(59.2 mV/pH at 25 °C). 

The sensor slope is different for each sensor 

and changes with age and wear.

TAN

Transaction number for releasing an 

 additional  function.

TTM, Time To 

 Maintenance

Adaptive maintenance timer. The TTM in-

terval is either read automatically from the 

sensor settings or can be specified manually. 

After expiration of the interval, the adaptive 

maintenance timer issues a Sensoface mes-

sage to remind you to service the sensor

Stressing influences (temperature, measure-

ment in extreme ranges) shorten the timer 

interval.

Two-point 

 calibration

Calibration with which the asymmetry 

 potential (zero point) and slope are deter-

mined. Two buffer solutions are required for 

two-point calibration.

Zero adjustment

Basic adjustment of the ISFET sensor to 

 ensure reliable Sensoface information.

Zero point

See asymmetry potential

Summary of Contents for Stratos Pro A201 PH

















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands