121
Final steps
•
Ensure that the contact surface is sufficiently greased when installing the locking system, e.g.
using RENOLIT AS, see section 3.5 “Greasing”, page 17.
•
Reinstall locking segment.
Only now is the second person allowed to let go of the suspended load.
•
Slide securing sleeve over the locking segment and attach locking screw.
e) Check the locking screws LC spring arm
•
Checking the bearing clearance:
–
Bearing bush spring arm to tracking arm
–
Slide bearing cardan joint to spring arm
–
Slide bearing TFT bracket to spring arm
•
Replace bearings if necessary.
