13
Via this USB Port you can create a USB Stick containing the Starter-Program-Software for the Sensor-
button TOUCH
POWER button
The button at the front of the Base-unit has a power on/off function once the Base-unit is powered.
Pressing the Button switches the unit on and off in Deep-Standby: the Base-unit shuts down completely, WiFi is
deactivated, and can only be turned on by the POWER button. Green LED in button signals status.
2.1.2
Rear Panel
ID
Name
Description
1
DC Power socket
Connect the included power adapter DC 12V/2A to this socket, and
connect the plug to an available electrical outlet
2
LAN
Connect an Ethernet cable between this jack and a LAN to connect the
Base-unit to LAN; PoE ready
3
USB port
USB port, for pairing Sensor-button TOUCH, mouse control, USB touch
screen etc.; same functions as front-USB
4
Reset
for restoring the factory default setting (needs tool)
5
HDMI OUT
To connect an HD or 4K/HDMI 2.0 output device
6
LINE OUT
2 channel analog audio output, de-embedded from HDMI OUT;
connect a 3.5 mm mini-jack PC connector from this jack to the LINE IN
jack of an audio system
7
HDMI IN
Connect a local HDMI output (PC, document camera, DVD) up to
4K/60Hz, HDCP 2.2 source device
8
LINE IN
2-channel analog audio input is only active, when it detects no audio
signal in HDMI IN data flow, like DVI-Input. Connect a 3.5 mm mini-jack
PC connector from this jack to the Line Out jack of external audio
source devices
9
ANT.
Screw up the included two antennas to these two ports
Summary of Contents for Klick & Show K-10S
Page 79: ...79 9 1 Dimensions...
