23
Note:
If there is no sound, it can have different causes, for example:
1
Check the volume control on your laptop's taskbar; see in "Mixer" if "WirelessMedia" or "Video Playback" is
activated.
To keep the internal speaker of PC/Lap muted while route the audio to the Base-unit, use the
audio mute icon in the status bar.
2
The used video-
player may need an update to latest version.
3
An active virus scanner can block the sound reproduction, check the "settings" in your virus scanner, and
check the influence by turning off the virus scanner.
3.6
LAN connection
The Base-unit can be connected to a local network or directly to a PC/Laptop. For normal operation, a LAN
connection is not necessary. When needed, it is suggested to connect the Klick & Show to the internet.
The LAN connection can be used for:
network integration of Base-unit in guest or company network
telnet control of the Base-unit
Over-The-Air -Update (OTA) of firmware of base-unit
maintenance purpose (in preparation)
Telnet commands
Telnet is a relatively simple, text-based protocol by which a computer of another person can connect via internet
to Klick & Show. Control via TCP/IP (port 5656) is possible. You can find the list of commands in chapter 8.
Summary of Contents for Klick & Show K-10S
Page 79: ...79 9 1 Dimensions...
