Kindermann Klick & Show K-10S, Installation And User Manual

Page: 19 / 90

19
3. Installation
3.1 Installation methods for the Base-unit
The Base-unit can be placed on a table in meeting room or be mounted on the wall.
The antennas are removable. They can rotate or tilt for better wireless connection.
Note:
For optimum function, install the Base-unit near monitor. Avoid obstacles between Sensor-button TOUCH and
Base-unit.
Necessary tools
• A drill (type of drill depends on the type of wall/table)
• Flat screwdriver
• Additional screwdriver that matches the mounting screws (mounting screws not included in the package).
Necessary parts
• 2 mounting screws (the head of the screw has to be smaller than the whole of the bracket)
• 2 plugs fitting to Wall and Screws
• 2 mounting bracket (included in the box).
How to install
 Drill two holes in the wall as indicated on the drawing. Horizontal distance: 177 mm ± 0.15.
 At the bottom of Base-unit, place the bracket on the 4 holes and turn in 4 delivered flat screws to be fasten
enough.
 Drive in 2 screws. Please leave at least a dimension 0.15mm space to place the bracket between the screw
header and wall.
 Place the Base-unit on the wall, so that the holes on the bracket matches the 2 unfixed screws on the wall..
Hoop the bracket on the screw and slide the Base-unit downwards until it is fixed in the 2 screw on the wall.
Antenna placement rules

The antennas should be oriented vertically, so perpendicular to the ceiling and parallel to the walls.