22
3.5
Audio Connection
The WiFi of Sensor-button TOUCH transmits the audio output of the PC/Laptop, re-direct and send to the Base-
unit together with the video signal. The audio will be output at line levels from mini jack socket 3.5 mm
connector and via the HDMI output connectors simultaneously.
Audio via HDMI output
When your display/projector is connected via HDMI and it support audio together with video than a separate
audio connection is not necessary. The audio signal is sent together with the video signal to the display.
Note:
If there is no sound from speaker check the settings of volume-mixer in taskbar of laptop, “WirelessMedia” or
“Video-Playback” must be activated.
Audio Output
Connect the analog audio “LINE OUT” (mini Jack 3.5mm) of the Base-unit with the meeting room’s sound system
by using a fitting cable.
PC/Laptop Sound
As default set, Klick & Show will mute the internal speaker of PC/Laptop and route the audio to the Base-unit,
after PC/Laptop is successfully mirroring desktop to the main screen, in order to avoid the repeated audio. When
transmission is stopped at Sensor-button, local loudspeaker will return to previous status.
Summary of Contents for Klick & Show K-10S
Page 79: ...79 9 1 Dimensions...
