33
5.1.4
PPPoE settings
Click to configure the PPPoE (Point-to-Point Protocol over Ethernet) settings.
PPPoE Setting:
User name: Fill in the appropriate user name.
Password: Fill in the right password for this user.
Check box to choose “Save Account and Password” and “Show Password”.
After finish, please click the “connect” to save and return. Or, please click “Cancel”.
5.2
Tethering & portable access point
5.2.1
Portable Wi-Fi access point
Activate or deactivate WiFi (Access-Point). When WiFi is deactivated, the Sensor-buttons TOUCH do not work, as
well as the usage of mobiles are not possible.
The setting is saved when the unit is switched off, but is overridden
by the setting "Wifi access point Auto-On" from 5.2.2
Note:
The current Klick & Show firmware V2.2.6C and greater, can also transmit the screen without the
Sensor-buttons
TOUCH,
via a LAN connection of the laptop to the company-network, see Chap. 6.1.2. The Wi-Fi network of Klick &
Show can be disabled in this case, to eliminate sources of interference in larger installations, and to minimize
energy consumption and radiation
Summary of Contents for Klick & Show K-10S
Page 79: ...79 9 1 Dimensions...
