Kikusui PLZ-4W Series, User Manual

Page: 98 / 218

6-8 Applied Operation PLZ-4W
4. Save the settings to the setup memory.
Press the ENTER key.
The STORE key illuminates.
The settings described above are saved to the memory. If settings are
already stored at the selected memory number, the settings are overwrit-
ten.
The STORE key remains illuminated while the saved settings are used.
6.2.2 Recalling the Setup Memory
1. Check that the load is turned off.
2. Select the setup memory.
Press the RECALL key.
The RECALL key blinks.
The setup memory recall screen appears. The recall screen shows the
number of the memory to which settings were saved previously (0 by
default).
3. Select the number of the memory to be recalled.
Turn the rotary knob to show the number of the memory to be recalled.
• When a memo is attached, it is displayed under the memory number.
• If you press the PREV (SHIFT+ ) key or RECALL key, the settings are not
recalled from the setup memory, and the display returns to the basic setting entry
condition (the characters “SET” is highlighted).
4. Recall the setup memory.
Press the ENTER key.
The RECALL key illuminates.
The settings in the memory are recalled.
The RECALL key remains illuminated while the recalled settings are used. If
you change the settings, the RECALL key turns off.
• The setup memory cannot be recalled when the load is turned on.
• The setup memory can store most of the settings including the operation mode
and range setting. Note that if the stored settings differ from the current operation
mode or range setting, they will be switched.
0.00
mA
0.000
V
0.000
W
CC
0.000
A
SET
H 33A 150V
No. 1
RECALL
ENTER
SLEWRATE
1.012
A / μ s
NOTE
NOTE