Kikusui PLZ-4W Series, User Manual

Page: 99 / 218

PLZ-4W Applied Operation 6-9
Fig. 6-4 Contents stored to the setup memory
0.00
mA
0.000
V
0.000
W
CC
SLEWRATE
8.000
A
0.01
mA/
μ
s
SET
H 33A 150V
0.00
mA
0.000
V
0.000
W
CC+CV
SLEWRATE
8.000
A
0.01
mA/
μ
s
SET
H 33A 150V
Press RECALL.
ENTER
• In CC, CR, CV, or CP mode
Settings
(switch using SET/VSET)
Setting
Operation mode
Range setting
Operation mode
Range setting
RECALL
STORE
No. 1
STORE
ENTER
ENTER
No. 1
RECALL
ENTER
ENTER
RECALL
STORE
No. 1
STORE
ENTER
ENTER
No. 1
RECALL
ENTER
Recalls the operation mode, range setting,
one setting (current, resistance, voltage,
or power), and the contents of ABC preset
memories saved at the operation mode
and range setting that are saved to the
specified No.
In this example, current range of 33 A, voltage
range of 150 V, present setting of 8 A, and the
contents of ABC preset memories saved at the
current operation mode and range setting are saved.
Saves to the memory of the specified No.
the operation mode, range setting, setting
(current, resistance, voltage, orpower),
and the contents of ABC preset memories
saved at the current operation mode and
range setting.
[Save to the setup memory]
[Recall the setup memory]
Press STORE.
(SHIFT+RECALL)
Select No. and
press ENTER. Select No. and
press ENTER.
• In CC+CV or CR+CV mode
Recalls the operation mode, range setting,
two settings (current or resistance and
voltage), and the contents of ABC preset
memories saved at the operation mode
and range setting that are saved to the
specified No.
In this example, current range of 33 A, voltage
range of 150 V, present settings of 8 A and 12 V,
and the contents of ABC preset memories saved at the
current operation mode and range setting are saved.
Saves to the memory of the specified No.
the current operation mode, range setting,
two settings (current or resistance and
voltage), and the contents of ABC preset
memories saved at the current operation
mode and range setting.
[Save to the setup memory]
[Recall the setup memory]
Press STORE.
(SHIFT+RECALL)
Select No. and
press ENTER.
Press RECALL.
Select No. and
press ENTER.
preset