Kikusui PLZ-4W Series, User Manual

Page: 114 / 218

6-24 Applied Operation PLZ-4W
14. Set the execution time of step 1.
On the initial screen, the time is 0:00:00.001. Press the key to move the cur-
sor to step 001. Since we are setting step 1 to 200 s (03 min:20 s), press the
or CURSOR key to move the cursor to the digit you wish to change and turn
the rotary knob.
When 60 s is exceeded, the digit is carried over to minutes (min). Therefore,
keep turning the rotary knob until 03 (min):20 (s) is reached.
15. Set the execution time of step 2.
Press the key to move the cursor to step 002. Like step 1, turn the rotary
knob to set the execution time of step 2 to 150 s (02 min:30 s).
16. Set the execution time of step 3.
Press the key to move the cursor to step 003. Like step 1, turn the rotary
knob to set the execution time of step 3 to 80 s (01 min:20 s).
After setting the execution times, press the NEXT (SHIFT+ ) key or the
ENTER key to move to the next edit screen.
17. Set the execution pattern of step 1.
Since we are setting step 1 to load on and slope pattern, move the cursor to
each item and set LOAD and RAMP to ON.
Leave TRIG and PAUSE at OFF.
18. Set the execution pattern of step 2 and 3.
Like step 1, move the cursor and set the execution pattern of step 2 (LOAD
ON, RAMP OFF, TRIG OFF, and PAUSE OFF), and the execution pattern of
step 3 (LOAD OFF, RAMP OFF, TRIG ON, PAUSE OFF).
We are done entering all the settings of program 1.
■
Setting program 2
19. Move to the settings of program 2.
Press the PREV (SHIFT+ ) key three times to return to the program edit
(SEQ) screen.
After returning to the program operation screen, check whether the cursor is
blinking at the program number line.
20. Set the program number.
In program 2, set the program number to 2.
Move the CURSOR key to move to the next item.
21. Enter a memo.
Enter characters in the same fashion as step 3.
In program 2, enter “Program2”. After entering the memo, move the CUR-
SOR key to move to the next item.
SEQ EDIT
PREV NEXT
002 0:00: 00.001
0:00: 00.001
003 0:00: 00.001
[ h : m i n : s . m s ]
END
TOTAL 003
001
SEQ EDIT
PREV NEXT
0:02: 30.0––
0:03: 20.0––
003 0:00: 00.001
[ h : m i n : s . m s ]
END
TOTAL 003
001
002
SEQ EDIT
PREV NEXT
0:02: 30.0––
0:03: 20.0––
0:01: 20.0––
[ h : m i n : s . m s ]
END
TOTAL 003
001
002
003
SEQ EDIT
PREV
001 ON ON OFF OFF
002 ON OFF OFF OFF
003 OFF OFF ON OFF
LOAD RAMP TRIG PAUSE
END
TOTAL 003