Kikusui PLZ-4W Series, User Manual

Page: 188 / 218

9-6 Specifications PLZ-4W
Remote sensing
Protection function
Sequence function
Others
Model PLZ164W PLZ334W PLZ1004W PLZ164WA PLZ664WA
Voltage that can be
compensated
2 V for a single line
Model PLZ164W PLZ334W PLZ1004W PLZ164WA PLZ664WA
Overvoltage protection (OVP) Turns off the load at 110 % of the rated voltage
Overcurrent protection (OCP) 0.03 A – 36.3 A 0.06 A – 72.6 A 0.2 A – 220 A 0.03 A – 36.3 A 0.13 A – 145.2 A
Or 110 % of the maximum current of each range
Load off or limit selectable
Overpower protection (OPP) 0.1 W – 181.5 W 0.3 W – 363 W 1 W – 1 100 W 0.1 W – 181.5 W 0.6 W – 726 W
Or 110 % of the maximum power of each range
Load off or limit selectable
Overheat protection (OHP) Turns off the load when the heat sink temperature reaches 95 ° C
Undervoltage protection
(UVP)
Turns off the load when detected.
Can be set in the range of 0 V to 150 V or Off.
Reverse connection detection
(REV)
By diode and fuse. Turns off the load when an alarm occurs.
Model PLZ164W PLZ334W PLZ1004W PLZ164WA PLZ664WA
Normal
sequence Operation mode CC, CR, CV, or CP
Maximum number
of steps
256
Step execution time 1 ms – 999 h 59 min
Time resolution 1 ms (1 ms – 1 min)
100 ms (1 min – 1 h)
1 s (1 h – 10 h)
10 s (10 h – 100 h)
1 min (100 h – 999 h 59 min)
Fast
sequence Operation mode CC or CR
Maximum number
of steps
1024
Step execution time 25 μ s – 100 ms
Time resolution 25 μ s (25 μ s – 100 μ s)
100
μ
s (100
μ
s – 100 ms)
Model PLZ164W PLZ334W PLZ1004W PLZ164WA PLZ664WA
Elapsed time display Measures the time from load on to load off. On/Off selectable.
Measures from 1 s up to 999 h 59 min 59 s
Auto load off timer Automatically turns off the load after a speci fi ed time elapses.
Can be set in the range of 1 s to 999 h 59 min 59 s or off