Kikusui PLZ-4W Series, User Manual

Page: 110 / 218

6-20 Applied Operation PLZ-4W
Table6-3 Setup items on each setup screen
Edit screen Setup item Description
Program operation
No. Program number (1 to 10)
Memo Memo (11 characters)
Mode Operation mode (CC, CR, CV, or CP)
Range Range setting (Current range - Voltage range)
Loop
Number of program loops
(1 to 9999) 9999 is in
fi nite loop
Last Load
Load condition after the end of the sequence
(ON/OFF)
Last Set
Current value after the end of the sequence
(0.000 to 100 % of the range setting)
Chain
The number of the next program to be executed
after the end of the this program (OFF, 1 to 10)
Step setting
CC SET Setting executed in the step
(A, mS, V, or W)
CR SET
CV SET
CP SET
Step execution time h:min:s.ms
Hours:minutes:seconds
(0.00:00.001 to 999.59:--.---)
Step execution pattern
LOAD Load on/off
RAMP Current transition (ON/OFF)
TRIG Trigger output (ON/OFF)
PAUSE Pause condition (ON/OFF)