manualshive.com logo in svg

Kia NiroEV 2019, Owner'S Manual, Page: 62 / 623

Share
Download
Kia NiroEV 2019 Owner'S Manual Download Page 62

59

■

■

Low battery

When the high voltage battery level
reaches around 8% or less, this
warning message is displayed.
The warning light on the instrument
cluster (

) will turn on simultane-

ously. Charge the battery immediate-
ly.

■

■

Charge immediately.
Power limited

When the high voltage battery level
reaches around 3% or less, this
warning message is displayed.
The warning light on the instrument
cluster (

) and the power down

warning light (

) will turn on simul-

taneously.
The vehicle’s power will be reduced
to minimise the energy consumption
of the high voltage battery. Charge
the battery immediately.

Warning Message on 
LCD Display
(related to electric vehicle)

When there are 1-2 gauge bars
left for the high voltage battery,
the vehicle speed is limited and
then eventually the vehicle will
turn OFF. Charge the vehicle
immediately.

CAUTION

ODEEVQ018060L

ODEEVQ018061L

DRIVING ELECTRIC VEHICLE

Summary of Contents for NiroEV 2019
















































































































































































































































































































































































































































































































































































































































Reviews:

No comments